## Journal of the American College of Cardiology

# Computational Fluid Dynamics Applied to Cardiac Computed Tomography for Noninvasive Quantification of Fractional Flow ReserveScientific Basis

## Author + information

- Received June 15, 2012
- Revision received October 19, 2012
- Accepted November 20, 2012
- Published online June 4, 2013.

## Author Information

- Charles A. Taylor, PhD
^{*},^{†}, - Timothy A. Fonte, BS
^{*}and - James K. Min, MD
^{‡},^{*}(james.min{at}cshs.org)

^{*}HeartFlow, Inc., Redwood City, California^{†}Department of Bioengineering, Stanford University, Stanford, California^{‡}Cedars-Sinai Heart Institute, Los Angeles, California

- ↵*
**Reprint requests and correspondence:**

Dr. James K. Min, Cedars-Sinai Medical Center, Cardiology, The Heart Institute, 8700 Beverly Boulevard, Taper Building, Room 1253, Los Angeles, California 90048.

## Abstract

Coronary computed tomography angiography (CTA) has emerged as a noninvasive method for direct visualization of coronary artery disease, with previous studies demonstrating high diagnostic performance of CTA compared with invasive coronary angiography. However, CTA assessment of coronary stenoses tends toward overestimation, and even among CTA-identified severe stenosis confirmed at the time of invasive coronary angiography, only a minority are found to be ischemia causing. Recent advances in computational fluid dynamics and image-based modeling now permit determination of rest and hyperemic coronary flow and pressure from CTA scans, without the need for additional imaging, modification of acquisition protocols, or administration of medications. These techniques have been used to noninvasively compute fractional flow reserve (FFR), which is the ratio of maximal coronary blood flow through a stenotic artery to the blood flow in the hypothetical case that the artery was normal, using CTA images. In the recently reported prospective multicenter DISCOVER-FLOW (Diagnosis of Ischemia-Causing Stenoses Obtained Via Noninvasive Fractional Flow Reserve) study and the DeFACTO (Determination of Fractional Flow Reserve by Anatomic Computed Tomographic Angiography) trial, FFR derived from CTA was demonstrated as superior to measures of CTA stenosis severity for determination of lesion-specific ischemia. Given the significant interest in this novel method for determining the physiological significance of coronary artery disease, we herein present a review on the scientific principles that underlie this technology.

Coronary revascularization is often performed on an ad hoc basis from semiquantitative measures of percent luminal diameter narrowing of the artery visualized at the time of invasive coronary angiography (ICA) (1). This practice stems from the research of Gould et al. (2), who elegantly demonstrated the relationship between stenosis and ischemia, as determined by myocardial blood flow reserve, wherein flow to the myocardium is compromised as the luminal diameter progressively narrows. This diminution in flow is most evident at hyperemic states and begins as early as 40% narrowing of vessel diameter, with more predictable reductions in hyperemic flow for stenoses ≥70% (3).

However, the relationship between coronary stenosis and myocardial ischemia is more complex, with ensuing studies demonstrating an unreliable relationship between stenosis and ischemia (4). One example of this was highlighted in the nuclear substudy of the COURAGE (Clinical Outcomes Utilizing Revascularization and Aggressive Drug Evaluation) trial; in this study in patients with ≥70% stenosis, only 32% exhibited severe ischemia and 40% manifested no or mild ischemia according to myocardial perfusion scintigraphy (5).

At present, the gold standard assessment of the hemodynamic significance of coronary stenoses is fractional flow reserve (FFR) (6). FFR uses a pressure wire to determine the ratio of maximal coronary blood flow through a stenotic artery to the blood flow in the hypothetical case that the artery was normal, and it is the only diagnostic method to date for ischemia detection to demonstrably advance event-free survival (7,8). In the FAME (Fractional Flow Reserve Versus Angiography for Multivessel Evaluation) trial of 1,005 patients with multivessel coronary artery disease (CAD), FFR-guided revascularization (i.e, revascularization for lesions with FFR ≤0.80) was associated with a 28% lower rate of major adverse cardiac events compared with an angiography-guided strategy. The salutary outcomes for individuals undergoing FFR-guided revascularization are long-lived and cost-saving (9). The results from FAME are in accordance with the 5-year follow-up of individuals from the DEFER (Deferral Versus Performance of PTCA in Patients Without Documented Ischemia) study (7). Among lesions judged angiographically “obstructive,” >50% were hemodynamically insignificant according to FFR. No benefit was observed for revascularization in patients with hemodynamically insignificant lesions. In the FAME 2 trial, FFR-guided therapy reduced the need for urgent revascularization in patients with stable CAD and hemodynamically significant lesions (10).

Coronary computed tomography angiography (CTA) is a noninvasive method for visualization of CAD (11–13). Previous CTA studies have observed an overestimation of stenosis severity, and even among high-grade stenoses according to CTA confirmed by using ICA, only a minority cause ischemia (14,15). Coronary lesions considered severe according to CTA cause ischemia less than one-half of the time (15). These findings have provoked concerns that widespread application of CTA may encourage unnecessary ICA (16).

Numerous imaging tests exist for physiological assessment of CAD, including stress echocardiography, cardiac magnetic resonance, and myocardial perfusion scintigraphy. These modalities assess wall motion abnormalities or regional differences in coronary flow reserve (CFR) as a surrogate for ischemia and identify individuals who may have severe stenoses. Although robust for ischemia detection on a per-patient basis, these tests demonstrate poor discrimination of specific vessels with coronary lesions that cause ischemia. As an example, when using an FFR standard for vessel-specific ischemia, myocardial perfusion scintigraphy identifies ischemic territories correctly <50% of the time, with underestimation and overestimation in 36% and 22% of cases, respectively (17). Such data have evoked concerns for the ability of stress testing to effectively isolate coronary lesions that benefit from revascularization.

Recent advances in computational fluid dynamics enable calculation of coronary flow and pressure fields from anatomic image data (18). Applied to CTA, these technologies enable calculation of FFR without additional imaging or medications. The DISCOVER-FLOW (Diagnosis of Ischemia-Causing Stenoses Obtained Via Noninvasive Fractional Flow Reserve) trial, compared with invasive FFR, noninvasive FFR derived from CTA, or FFR_{CTA}, demonstrated per-vessel accuracy, sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) for lesions causing ischemia of 84.3%, 87.9%, 82.2%, 73.9%, and 92.2%, respectively, for FFR_{CTA}(19). The performance of FFR_{CTA} was superior to CTA stenosis for diagnosing ischemic lesions, the latter of which demonstrated an accuracy, sensitivity, specificity, PPV, and NPV of 58.5%, 91.4%, 39.6%, 46.5%, and 88.9%, respectively. Case examples of non–ischemia-causing and ischemia-causing stenoses can be seen in Figures 1 and 2, respectively. More recently, the DeFACTO (Determination of Fractional Flow Reserve by Anatomic Computed Tomographic Angiography) trial, a pivotal multicenter international study evaluating FFR_{CTA} against CTA for diagnostic accuracy of ischemia, has been published (20). This trial consisted of 252 patients for which 407 vessels were directly interrogated by using FFR. On a per-patient basis, FFR_{CTA} was superior to CTA stenosis for diagnosis of ischemic lesions for accuracy (73% vs. 64%), sensitivity (90% vs. 84%), specificity (54% vs. 42%), PPV (67% vs. 61%), and NPV (84% vs. 72%). In patients with intermediate stenoses (30% to 70%), there was a more than 2-fold increase in sensitivity, from 37% to 82%, with no loss of specificity.

Given the rapid clinical evidence development of FFR_{CTA}, we herein present the fundamental tenets that underlie the basis of computational modeling of coronary flow and pressure.

## Cardiovascular Form and Function Relationships

Computation of FFR_{CTA} requires construction of an anatomic model of the coronary arteries; a mathematical model of coronary physiology to derive boundary conditions representing cardiac output, aortic pressure, and microcirculatory resistance; and a numerical solution of the laws of physics governing fluid dynamics. This combination of anatomy, physiology, and fluid dynamics enables the computation of coronary flow and pressure.

Anatomic data obtained from CTA contains a wealth of information on coronary blood flow because “form follows function” in circulatory systems (21). These form–function relationships are universal and enable the circulation to provide an adequate supply of blood at appropriate pressures to organs under varying physiological states (e.g., exercise) and to adapt to chronic changes, including disease progression. Allometric scaling laws, which relate the mass of an object to shape, anatomy, and physiology, are critical for defining cardiovascular form–function relationships and are broadly applicable to the entire cardiovascular system (22). Allometric scaling laws also enable relation of organ size to flow rate. For example, under resting conditions, total coronary flow is proportional to myocardial mass,

Form–function relationships also apply directly to coronary arteries, which may dilate or constrict to modulate organ blood flow (e.g., in exercise), enlarge in response to chronic increases in blood flow (e.g., in arteriovenous fistulas), or diminish in caliber in response to reductions in blood flow. The mathematical relationship between vessel size and flow rate was first proposed by Murray (24) in 1926, as *Q* is the flow rate through a blood vessel, *d* is its diameter, and *k* is a constant derived empirically for which Murray proposed a value of 3. In its simplest form, Murray’s law is the manifestation of adaptive mechanisms whereby blood vessels sense the level of shear stress on the endothelial surface and remodel to maintain homeostasis. This flow–diameter relationship can be understood by considering Poiseuille’s solution, which relates vessel flow rate, *Q*, vessel diameter, *d*, and the wall shear stress, *μ* is the fluid viscosity. If wall shear stress is maintained at a constant, homeostatic level, then this formula implies that

Morphometry laws of the form *p*, down the length of a coronary artery is largely constant and forces flow through each branch in accordance with the relationship:*R* is the resistance to flow of the branch vessel. Therefore, *k*, relating flow to diameter. Thus, small coronary branches have a higher resistance to flow than larger branches, and the resistance to flow distal to a stenosis will be directly related to the number and size of vessels downstream.

## Computational Fluid Dynamics

Coronary flow and pressure can be computed by solving the governing equations of fluid dynamics, which relate to conservation of mass and balance of momentum, and which have been known in their current forms as the Navier-Stokes equations for >150 years. These equations are solved for the unknown pressure, which varies with position and time, and for the 3 components of blood velocity, each of which are functions of position and time. The physical properties of blood, the fluid density and the fluid viscosity, are known when solving these equations. Although blood exhibits complex rheological properties, it can be approximated as a Newtonian fluid with a constant viscosity in large arteries.

Notable features of the equations of fluid dynamics are their universality for describing phenomena ranging from airflow over a jetliner to water flow in a river to blood flow in arteries, as well as their ability to capture complex phenomena. However, the governing equations of blood flow can only be solved analytically under special circumstances (e.g., steady or pulsatile flow in an idealized circular cylindrical geometry). For realistic patient-specific models of the human coronary arteries, a numerical method must instead be used to approximate the governing equations and to obtain a solution for velocity and pressure at a finite number of points (28). This requires solving millions of nonlinear partial differential equations simultaneously and repeating this process for thousands of time intervals in a cardiac cycle. Numerical methods for solving fluid dynamics problems are known as computational fluid dynamics (CFD) methods.

The governing equations are insufficient to solve blood flow problems; a domain of interest must be defined, and boundary conditions need to be specified. Boundary conditions are mathematical relationships between the variables of interest (e.g., flow and pressure) defined on the boundaries of the mathematical model. Specific to modeling blood flow in arteries, the domain of interest is where the blood is flowing (i.e., the lumen), and the relevant boundaries are the lateral surface, the inlet boundary (the aortic root), and the outlet boundaries of the ascending aorta and the coronary arteries.

It is virtually impossible to directly represent the heart and the >5 billion blood vessels in the human circulation, so the domain of interest for CFD models of arterial blood flow is a defined portion of the vascular system. Consequently, it is necessary to describe the conditions at the interface of the modeled domain and the remainder of the circulation. Figure 3 illustrates these concepts in an idealized model of steady flow through a single coronary artery with a stenosis.

## Image-Based Modeling of Blood Flow in Arteries

Coupled to CFD, the computation of FFR from CTA requires methods to extract models from image data and to incorporate boundary conditions that demonstrate the effect of the microcirculation (28,29). One contemporary development in image-based modeling of blood flow enables modeling of pulsatile coronary flow and pressure in realistic patient-specific models (18). Figure 4 depicts steps in the creation of an anatomic model of the coronary lumen from CTA data. During the model construction process, image segmentation algorithms extract the luminal surface of the major vessels and branches, up to the limits imposed by the resolution of CTA. This segmentation process involves extracting the topology of the coronary artery tree; identifying, analyzing, and segmenting coronary plaques in each vessel; and extracting the luminal boundary. For the finite element method used in the FFR_{CTA} technology, a mesh is generated from the geometric model with millions of vertices and elements, and solved for velocity and pressure on a parallel supercomputer.

## FFR Derived From CTA

Noninvasive computation of FFR requires coupling lumped parameter models of the heart, systemic circulation, and coronary microcirculation to a patient-specific model of the aortic root and epicardial coronary arteries extracted from CTA data. As shown in Figure 5, at the aortic inlet, a lumped parameter model representing the left ventricle is coupled to the aorta (18). At the aortic outlet, the model is used to enforce a relationship between pressure and flow (e.g., the aortic impedance). Notably, the cardiac output and the aortic pressure arise naturally through the interaction of the heart model and the model of the systemic circulation. For computation of FFR, parameters in the lumped models of the heart and systemic circulation are chosen so that the computed cardiac output matches that computed from an allometric scaling law, and the computed mean aortic pressure matches the patient’s measured mean brachial pressure. At the coronary outlets, a relationship between pressure and flow based on a model of the coronary microcirculation is enforced.

A key step in assignment of coronary outlet boundary conditions for computation of FFR_{CTA} is the prescription of unique resistance values for each outlet, based on the morphometry laws relating form and function described previously. Specifically, total coronary flow under basal conditions is computed from the myocardial wall volume extracted from CTA. Next, total coronary resistance is calculated from total coronary flow, and the mean aortic pressure is estimated from the mean brachial artery pressure. The basal resistance of each individual coronary outlet boundary is then computed by using total coronary resistance and a morphometry law of the form

The final step in assigning boundary conditions is simulating maximum hyperemia by modeling the effect of adenosine on reducing the peripheral resistance of the coronary microcirculation downstream of the epicardial arteries extracted from CTA. Wilson et al. (30) showed that for arteries with normal CFR, in which the epicardial resistance would be expected to be small both at rest and during hyperemia, total coronary resistance at maximum hyperemia fell to 0.24 of the resting value with intravenous administration of adenosine 140 μg/kg/min. This dose underlies that which is administered for pharmacological stress testing and is the dose used for measurement of FFR. This change in resistance of normal coronary arteries provides an upper bound on the maximal change that can be achieved in patients with microcirculatory dysfunction and represents an assumption made with invasive FFR, wherein the hyperemic microcirculatory resistance distal to a stenosis is assumed to be the same as that in the hypothetical case that the coronary arteries have no disease (31).

Upon generation of a discrete model (e.g., finite element mesh) of the ascending aorta and epicardial coronary arteries, and the definition of the boundary conditions for rest and hyperemic conditions, FFR_{CTA} can then be determined by solving the equations of blood flow for the velocity and pressure fields. FFR_{CTA} is then obtained by normalizing the mean hyperemic pressure field by the average mean hyperemic pressure in the aorta. The end result is a complete spatial distribution of FFR_{CTA}, as shown in Figure 6 for a patient with significant ischemia resulting from serial lesions in the left anterior descending coronary artery.

## Limitations

Numerous artifacts may affect CTA interpretability, including calcification, motion, and misregistration. Because FFR_{CTA} requires accurate anatomic models, these artifacts may limit accuracy. Thus, adherence to protocols that ensure good quality data and facilitate accurate lumen boundary descriptions is essential (32). Additional limitations of FFR_{CTA} relate to assumptions in the physiological models that include population-specific as well as patient-specific data. Relationships relating myocardial mass to total coronary flow, the relative coronary microvascular resistance based on vessel size, or reductions in resistance in response to adenosine-mediated hyperemia will vary among patients. In patients with microvascular disease, models of adenosine-mediated hyperemia may overestimate the degree of vasodilation, resulting in FFR_{CTA} values below those of measured FFR. Finally, no published data exist for FFR_{CTA} in the evaluation of in-stent restenosis or for coronary artery bypass grafts.

## Future Possibilities

CFD methods applied to CTA data have enabled noninvasive assessment of lesion-specific ischemia by FFR_{CTA}. Importantly, these methods may also enable prediction of changes in coronary flow and pressure from therapeutic interventions (e.g., percutaneous coronary intervention, coronary artery bypass graft) as shown in Figures 7 and 8. FFR_{CTA} enables study of other hemodynamic metrics (e.g., CFR, shear stress, total plaque force). For example, computed blood velocity, as shown in Figure 8C, may allow evaluation of flow stagnation in bypass grafts. In addition, other physiological states such as graded exercise conditions can be modeled. Finally, the technology underlying FFR_{CTA} is applicable to other common cardiovascular conditions, including peripheral, cerebrovascular, and renovascular disease, and may be used to determine whether vascular stenoses are hemodynamically significant as well as the relative benefit of therapeutic interventions.

## Footnotes

Dr. Taylor and Mr. Fonte are employees and shareholders of HeartFlow, Inc., which provides the FFR

_{CTA}service. Dr. Min is a member of the Speaker's Bureau and medical advisory board of General Electric; and has an equity interest in TC3.

- Abbreviations and Acronyms
- CAD
- coronary artery disease
- CFD
- computational flow dynamics
- CFR
- coronary flow reserve
- CT
- computed tomography
- FFR
- fractional flow reserve
- ICA
- invasive coronary angiography
- LAD
- left anterior descending
- LCx
- left circumflex
- MACE
- major adverse cardiac event(s)
- MBF
- myocardial blood flow
- MPS
- myocardial perfusion scintigraphy
- NPV
- negative predictive value
- PPV
- positive predictive value
- RCA
- right coronary artery

- Received June 15, 2012.
- Revision received October 19, 2012.
- Accepted November 20, 2012.

- American College of Cardiology Foundation

## References

- ↵
- Lucas F.L.,
- Siewers A.E.,
- Malenka D.J.,
- Wennberg D.E.

- ↵
- ↵
- ↵
- Tonino P.A.,
- Fearon W.F.,
- De Bruyne B.,
- et al.

- ↵
- Shaw L.J.,
- Berman D.S.,
- Maron D.J.,
- et al.

- ↵
- ↵
- Pijls N.H.,
- van Schaardenburgh P.,
- Manoharan G.,
- et al.

- ↵
- Fearon W.F.,
- Bornschein B.,
- Tonino P.A.,
- et al.

- ↵
- ↵
- Budoff M.J.,
- Dowe D.,
- Jollis J.G.,
- et al.

- Min J.K.,
- Shaw L.J.,
- Berman D.S.

- ↵
- Goldstein J.A.,
- Gallagher M.J.,
- O'Neill W.W.,
- Ross M.A.,
- O'Neil B.J.,
- Raff G.L.

- ↵
- Meijboom W.B.,
- Van Mieghem C.A.,
- van Pelt N.,
- et al.

- ↵
- Nissen S.E.

- ↵
- ↵
- ↵
- Koo B.K.,
- Erglis A.,
- Doh J.H.,
- et al.

- ↵
- ↵
- LaBarbera M.

- ↵
- West G.B.,
- Brown J.H.,
- Enquist B.J.

- ↵
- Choy J.S.,
- Kassab G.S.

- ↵
- Murray C.D.

- ↵
- Kamiya A.,
- Togawa T.

- ↵
- ↵
- ↵
- ↵
- Wilson R.F.,
- Wyche K.,
- Christensen B.V.,
- Zimmer S.,
- Laxson D.D.

- ↵
- Pijls N.H.,
- van Son J.A.,
- Kirkeeide R.L.,
- De Bruyne B.,
- Gould K.L.

- ↵